Design your own shock

1. Pick an eyelet style, see photo, (Ref # 1 - 10)

2. Pick a bushing style for the eyelet (Ref # 1 - 25)

3. All bases* have the same dimensions with a 1" mounting hole. The base is .700" wide. See the Fox/ACT Page 4

4. Pick an bushing style for the base (Ref # 1-25)

5. Enter a Center to Center dimension. No compressed length is necessary. We will give the maximum travel for the given distance.

6. Standard shaft size is ½". Add $25 for 5/8" shaft.
metric shaft sizes not available

7. Heim joints are not available.

8. Not all bushings will fit in all eyelets

Click on the image above, print, fill out, and fax to 651-430-2131.

Include name & phone. We will contact you with quote & estimated lead time.

* all bases come threaded for a Fox Air Valve. A 1/8 NPT is also available if you are using a reservoir or clicker - call for additional info and prices.

Eyelets - Pick one Ref # - Red = typical metric applications

1. Standard Fox style, 1" i.d. (SE-0001) Center to base = 1.15" 2. Standard Fox style, 1" i.d. (SE-0002) Center to base = 1.40" 3. Standard Fox style, 1" i.d. (SE-0003) Center to base = 1.65" 4. No flange, 1" id, .70" wide, (SE-0004) 5. .625" i.d., .81" wide (SE-0005) 6. .625" i.d., .880" wide, 1.5" flange (SE-0006) 7. 23.1mm i.d., 25.4mm wide, 1.5" flange 8. 10mm i.d., 30mm wide, 1.18" flange (#17 bushing) 9. 17.9mm i.d., 19mm wide 10. 10mm thru holes, 1.85" center to end 1.48" flange dia

Bushings, Shock sleeves - Pick one Ref # for top & bottom eyelet - we will match the correct rubber bushings. Red = most popular metric bushings
Ref #	PN	Length	I.D x O.D.	Notes
1	213-34-000	.790"	.571 x .815	stainless steel
2	213-33-000	.815"	.377 x .562	stainless steel
3	213-34-001	.975"	.571 x .815	stainless steel
4	213-33-001	1.000"	.377 x .562	stainless steel
5	213-01-039	1.025"	.635 x .815	stainless steel
6	213-00-002	1.165"	.377 x .562	stainless steel
7	213-00-008	1.190"	.377 x .562	stainless steel
8	213-00-003	1.240"	.377 x .562	stainless steel
9	213-00-004	1.340"	.377 x .562	stainless steel
10	213-00-005	1.400"	.377 x .562	stainless steel
11	213-00-007	1.720"	.377 x .562	stainless steel
12	213-88-001	2.070"	.377 x .562	stainless steel
13	-	1.280"	.570 x .815	steel
14	-	.790"	.635 x .815	steel
15	-	.910"	.377 x .625	stainless steel (match with eyelet #6)
16	-	1.340"	.377 x .625	stainless steel
17	12001-32927	30.0mm	10mm id	Metric, KYB OEM, for eyelet style 7 or 8 only (note 1)
18	-	30.0mm	10mm id	Metric sleeve, SS
18	-	29.6mm	10mm id	Metric sleeve, SS
20	-	19.7mm	8mm id	Metric sleeve, SS
21	A shaft goes through my eyelet, the shaft diameter is: (we will make a bushing to fit)
22	Not applicable (I don't need one)
23	I don't know
24	None - I will make one myself
25	Other (please specify)
note 1	bushing #17 can also be used in a standard 1.00" id base