Metric Service Kit SSK-2005 Retail Value $186 $159.00
9mm id shims
Item	Qty
30 x .25 30 x .20 30 x .15 26 x .25 26 x .20 26 x .15 26 x .11 24 x .25 24 x .20 24 x .15 24 x .11 20 x .25 20 x .15 14 x .20 14 x .11 schrader valve air valve SK 009 screws decals	5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 1 1 3 2 2
See Picture

Metric Parts and Shafts  

DeyCore is the only independent authorized KYB/HPG parts distribution center for snowmobile shocks in the United States.  Click here to skip down to Metric Shafts.

 Parts

Seal Kits
	SK-009 HPG/KYB Seal Kit, 12.5 mm Cap Oring: one fits HPG & one fits KYB Main seal Floating piston Oring $15.00    Save 5 pack (SK-009B) $60.00
	SK 012 Seal Kit, C-46, 16mm Cap Oring Main seal Floating piston Oring $13.00   Save 5 pack (SK-012B) $55.00

Misc Hard Parts

Floating Pistons, left to right, pistons include Oring but not wear strip 1. 11402-09908, C-36, 16mm, 1.55" outside dia, $29.00 Oring (separately): 11401-03010, $4.00 Wear Strip: 11401-03812, $7.00 Screw: 11201-90604 (included in 11402-09908) Oring for Screw: ORM-004 (Included in 11402-09908) 2. 11301-03303, C-36, 12.5mm, 1.40" outside dia, $15.00 Oring (separately): 11301-03006, $4.00 Wear Strip: 11301-03805, $7.00 3. 11401-03305, C-36 Piggyback, 12.5mm, 1.55" outside dia, $20.00 Oring (separately): 11401-03010, $4.00 Wear Strip: 11401-03812, $7.00 4. 11501-03303, C-46, 1.79" outside dia, $24.00 Oring (separately): 11501-03009, $4.00 Wear Strip: NA

KYB Seal Caps - 12.5 mm Top row, left to right 11302-00507, .83" approx height, $29.00 11302-00523, .96" approx height, $29.00 11302-00508, 1.12" approx height, $29.00 11301-01313, main seal (fits HPG also) included in all above, separately $6.00 (included in SK 009) Bottom row, left to right 11302-00347, dust seal assembly thin, $12.00 11302-00352, dust seal assembly thick, $12.00 11301-90514, nut, 9mm, $2.00

Spring Retainers
	11301-03933 $30.00
	11301-03936 $27.00
	11301-03931 $15.00
	left - $6.00 12251-02514 middle - $6.00 503 141 600   right - $8.00 503 140 600

HPG spring spacers $30.00 set - no dealer discounts adds 1.25" - limited qty's

Misc
	Bump stops: left - 12.5mm or 1/2"- $5.00 11301-91201 middle - 12.5mm or 1/2"- $7.00 11301-91202 right - 14mm - $9.75 12301-02305
	eyelet bushing 12001-32927 $10.00  23mm od, 10mm id, 30mm length
	Filler Cap $3.00 11301-02311

Shafts

Please read carefully before ordering shafts:

1. Measure your center of eyelet to end of shaft dimension

2. Pick the appropriate eyelet (A-H).

3. Under that eyelet type find the closest matching dimension

4. Order by DeyCore Length and eyelet type (A,B,C,D,E,F,G or H)

Example: Measure the assembly you want to replace, If the center of eyelet to end of shaft dimension is approx. 8 3/4" (8.75") and you need an "A" eyelet, order a 8.500-A.

• Assemblies priced below ($75.00 - $99.00), individual ski or middle shaft - $40.00 (12.5mm)

• All dimensions in inches unless noted. Spring retainers are not included.

• All shafts are 12.5mm diameter (except as noted).

• All eyelets are threaded and will fit any standard 1/2" or 5/8" DeyCore SS shaft also.

• Please note: Replacement shafts may not be the exact same size, but they will be within an acceptable tolerance and function the same.  

Metric Shafts - Rear/Misc/16mm
listed top to bottom
Application	PN	Center to End	Price
C-36 16mm	NGS-05	13.25"	$89.00
C-46 16mm	NGS-06	13.25"	$89.00
Middle 16mm .690" eyelet i.d. 1.070" eyelet length 1.625" flange dia	NGS-07	8.0"	$89.00

 

Home | About Us | Contact Us | Custom Shocks | Parts | Service | Site Index
Copyright 2007 Deycore Enterprises.  All Rights Reserved